Comparison of The Physical-Mechanical Properties of Eucalipto, Tornillo and Copaiba Woods for Formwork on Site, 2019
Loading...
Files
Date
Journal Title
Journal ISSN
Volume Title
Publisher
LACCEI Inc.
Abstract
The objective of this work was to compare the physical-mechanical properties of Eucalipto (Celendín – Cajamarca), Tornillo and Copaiba (Rodríguez de Mendoza – Amazonas), for this, 120 specimens were tested for each type of Wood, being a total of 360 specimens, which were tested in the concrete laboratory of the Universidad Privada del Norte, Cajamarca headquarters. The tests that were carried out were Moisture Content (E=14.97%, T=11.16%, C=18.92%), Basic Density (E=0.851 gr/cm3, T=0.663 gr/cm3, C=0.888 gr/cm3), Modulus of Elasticity of Compression Parallel to Grain (E=1928.78 kg/cm2, T=2730.09 kg/cm2, C=2699.70 kg/cm2), Stresses at the Limit of Proportionality of Compression Perpendicular to the Grain (E=70.06 kg/cm2, T=60.16 kg/cm2, C=52.42 kg/cm2), Modulus of Elasticity of Static Flexion (E=329473.63 kg/cm2, T=261823.27 kg/cm2, C=120437.22 kg/cm2). Being the Tornillo and Eucalipto, the most recommended woods for use as on-site formwork.
Description
Citation
Collections
Endorsement
Review
Supplemented By
Referenced By
Creative Commons license
Except where otherwised noted, this item's license is described as LACCEI License